Saw guard

Hypro’s Fall grabs with saw box are very lightweight but with a strong construction and therefore also very easy to use fitting on various machines including Forestry cranes-Telescopic cranes-Excavators.

• Unique design
• Maximum sawing diameter 500 mm
• Dead weight 169 kg without rotator so extremely low dead weight.
• From 35L/min choice of 5 or 10cc Parker plunger saw motor.
• Choice of various saw blades to suit the sheet work you will be doing.
• Also suitable as a bio grapple so for loading logs or branches.
• The saw is angled just like a harvester.
• Unique design of the clamp geometry is completely correct, so the trunk is well clamped in the middle.
• Large passage of hydraulic components so that the oil can reach the saw as easily as possible.
• Equipped with 2 piston accumulators so that the peaks in the hydraulic system are smoothed out, extending the service life of the hydraulic components.
• Suitable for both open and close centre systems
• Maximum lifting weight 1000 kg
• Various options and settings to adjust it to your machine.
• Available with quick-change system for quick change between for example clamp and drop grab.

Hypro’s Fall grabs with saw box are very lightweight but with a strong construction and therefore also very easy to use fitting on various machines including Forestry cranes-Telescopic cranes-Excavators.

• Unique design
• Maximum sawing diameter 500 mm
• Dead weight 193 kg without rotator so extremely low dead weight
• From 35L/min choice of 5 or 10cc Parker plunger saw motor.
• Choice of various saw blades to suit the sheet work you will be doing.
• Also suitable as a bio grapple so for loading logs or branches.
• The saw is angled just like a harvester.
• Unique design of the clamp geometry is completely correct, so the trunk is well clamped in the middle.
• Large passage of hydraulic components so that the oil can reach the saw as easily as possible.
• Equipped with 3-piston accumulators so that the peaks in the hydraulic system are smoothed out, extending the service life of the hydraulic
components.
• Suitable for both open and close centre systems
• Maximum lifting weight 1000 kg
• Various options and settings to adjust it to your machine.
• Available with quick-change system for quick change between for example clamp and drop grab.

The Hypro fall grabs with saw box are very lightweight but with a strong construction and therefore also very easy to use, fitting on various machines including Forestry cranes-Telescopic cranes-Excavators.

• Radio remote control for activation of various functions so you can decide yourself whether he should start sawing or lay down the trunk or open and
close the clamp. A small battery set can be placed on the clamp or a power point of 12 or 24 volts can be brought to the crane tip.
• Unique design
• Maximum cutting diameter 500 mm
• Own weight 193 kg without rotator so extremely low own weight.
• From 35L/min choice of 5 or 10cc Parker plunger saw motor.
• Choice of various saw blades to suit the sheet work you will be doing.
• Also suitable as a bio grapple so for loading logs or branches.
• The saw is angled just like a harvester.
• Unique design of the clamp geometry is completely correct, so the trunk is well clamped in the middle.
• Large passage of hydraulic components so that the oil can reach the saw as easily as possible.
• Equipped with 3-piston accumulators so that the peaks in the hydraulic system are smoothed out, extending the service life of the hydraulic
components.
• Suitable for both open and close centre systems.
• Maximum lifting weight 1000 kg
• Various options and adjustment possibilities to adapt it to your machine.
• Available with quick-change system for quick change between e.g. clamp and drop grab.

The Fall grabs with saw box of Hypro are very lightweight but with a strong construction and therefore very easy to use suitable for various machines including Forestry cranes-Telescopic cranes-Excavators.

• Radiographic remote control for activation of various functions so you can decide yourself whether he should cut or put down the trunk or the clamp
open and close there can be a small battery set placed on the clamp or a power point of 12 or 24 volts to the crane tip be brought.
• Unique design
• Maximum cutting diameter 600 mm
• Hydraulic chain tensioner
• Own weight 340 kg without rotator so extremely low own weight.
• From 40L/min choice of 10 – 14 – 19 cc Parker plunger saw motor depending on how many liters your machine gives per minute.
• Choice of various saw blades to suit the sheet work you will be doing.
• Also suitable as a bio grab so to load logs or branches.
• The saw is angled just like a harvester.
• Unique design of the clamp geometry is completely correct so the trunk is well clamped in the middle.
• Large passage of hydraulic components so that the oil can reach the saw as easily as possible.
• Equipped with 3 piston accumulators so that the peaks in the hydraulic system are smoothed out this extends the life of the hydraulic components
• Suitable for both open and close center systems.
• Maximum lifting weight 2000 kg
• Various options and adjustment possibilities to adjust it completely to your machine.
• Available with quick change so you can quickly switch between for example clamp and drop grab.